Rubber Speed Bump, 4‘ x 12" x 2-1/4" Easy Rider
Sale!
cplabsafety-1202607130222341046068

Rubber Speed Bump, 4‘ x 12″ x 2-1/4″ Easy Rider

Original price was: $216.00.Current price is: $54.00.

SKU: PG-ENC-24111 Category:

Description

Description

Rubber Speed Bump, 4’x12″ Easy Rider. Our 4 foot long recycled rubber Easy Rider® speed bumps are easy to install and maintenance free. Molded highly reflective tape ensures that the speed bumps are visible even on a dark night. The speed bumps have a channeled bottom to facilitate drainage as well as to cover cabling or piping. Choose to add optional end caps for a more finished appearance. Install multiple speed bumps end-to-end to make custom lengths.

Features of the Easy-Rider Speed Bumps

Molded highly reflective tape ensures that the speed bumps are visible even on a dark night. Optional cat’s eye reflectors further enhance visibility to alert drivers well in advance. The bumps have a channeled bottom to facilitate drainage as well as to cover cabling or piping.
Easy Rider® speed bumps are the ideal maintenance-free parking lot solution. In addition to enhancing parking lot safety, the bumps can lower insurance premiums for lot owners.
The Easy Rider® is available in 4′ and 6′ lengths including end caps to protect the speed bump ends and vehicles. GNR rubber speed bumps are covered by a 3 year warranty.

View our installation video for the Easy Rider® Speed Bump

Easy Rider® Speed Bumps are:

  • (L) 4′ x (W) 12″ x (H) 2 1/4″
  • Made of 100% recycled rubber
  • Long lasting and cost efficient
  • Reduces speed to 2-5 mph
  • High visibility at night
  • Simple installation
  • Product can be installed in sections to create varying lengths
  • Will not warp, crack, chip or rot
  • Can be installed on any road surface
  • Resistant to ultraviolet light, moisture, oil, and extreme temperatures
  • Temporary or permanent installation – Relocatable when resurfacing / maintaining road surfaces; products can be stored and re-used
  • Channeled bottom for cabling and piping
  • Lowers insurance premiums for lot owners
  • Maintenance free
  • Warranty: 3 years on the product; 1 year on the tape (under normal use)

Applications:

Used for the following situations:

  • Safety of pedestrian and vehicle traffic requires improvement
  • To further support and reinforce stop signs in parking lots
  • High risk of accidents on residential streets and in parking lots need to be reduced
  • Permanent or temporary lowering speed of motor vehicles is required
  • Only temporary installation is allowed or required
  • Installation on surfaces where only flexible rubber speed bumps may fully conform to the curvature of the road

Technical Specs

Product Name: Rubber Speed Bumps 2 1/4″ thick

Models: 6′, 4′ long

Product description:

1. Material: compression molded composite: 100% recycled rubber and polyurethane prepolymer
2. Physical properties of the rubber composite:
a. Density 0.6 oz/cu in (ASTM C642)
b. Durometer Hardness 70A ± 7 (ASTM D2240)
c. Tensile Strength 300 psi (ASTM D412)
d. Compression deformation 7% at 70psi, 68°F (ASTM D575)
e. Brittleness at Low temperature: -40°F (ASTM D746)
f. Freeze and thaw when exposed to de-icing chemicals no loss after 50 cycles (ASTM C672)
g. Coefficient of thermal expansion: 8 x10-5 in/in/°F (ASTM C531)
h. Weathering 70 hours at 158°F (ASTM D573)
– hardness retained 100% ( ± 5%)
– compressive strength 100% ( ± 5%)
– tensile strength 100% ( ± 5%)
– elongation retained 100% ( ± 5%)

3. Available models: 6′, 4′ long
4. Finishing: Black recycled rubber composite with yellow, durable and reflective, in-molded pavement marking tape

Components:

a) 100% recycled rubber from car and truck tires (NR, SBR)
b) polyurethane prepolymer
c) cat’s eyes reflectors
d) yellow, durable and reflective in-molded pavement marking tape

Extended Information

Installation Guide
 

Components

  • Easy Rider® speed bumps
  • 1/2″ (diameter) , 14″ (length) rebar spikes for asphalt or lag bolts with metal shields for concrete – available as an add-on or at the hardware store
 
What You Need
 
  • Gloves, safety glasses
  • Traffic cones, drums or barricades for securing the site
  • Mallet
  • Heavy duty electric drill
  • 1/2″ masonry bit and, if installed with lag bolts: a masonry bit required for the metal shields – consult bit size on side of shield
  • A drive socket and power tool for installation of the lag bolts

The flexible design of the Easy Rider® Speed Bump allows the product to conform to the contour of uneven road surfaces and can be installed on both asphalt and concrete.

Installations Instructions for Asphalt: Installation of Easy Rider® Speed Bumps with spikes
 
Step 1.

Drill 1/2″ diameter holes (3 – 4″ in depth) in the asphalt through the product’s holes.
 

Step 2.

Drive 1/2″ rebar spike (14″ long) through the holes in the product.

Installation Instructions for Concrete: Installation of Easy Rider® Speed Bumps with lag bolts and metal shields
 

Step 1.

Use 1/2″ or 5/8 lag bolts (5 1/2″ long.)
 
Step 2.

Drill 1/2″ diameter pilot holes (3 – 4″ in depth) through the product’s installation holes.

  
 
Step 3.

Remove the product; re-drill the holes for the diameter and depth required by the metal shields.
 

Step 4.

Install the metal shields, re-position the product and bolt with lag bolts.

Maintenance
 
Speed bumps require minimal maintenance. Periodically inspect the bolts and tighten if necessary.

Reviews

There are no reviews yet.

Be the first to review “Rubber Speed Bump, 4‘ x 12″ x 2-1/4″ Easy Rider”

Your email address will not be published. Required fields are marked *

Related products